ATP10 GEN III CONTI® SYNCHROFLEX polyurethane timing belt

Standard version:

  • Single-sided
  • High performance polyurethane mixture (colour: red) for higher performance, longer longevity and better temperature resistance
  • Bifilar design of the steel tension members for optimised straight belt run
  • Higher packing density of tension members for a higher overall stiffness
  • High performance ATP profile with metric pitch and trapezoidal teeth
  • Preferred belt widths: 16, 25, 32, 50, 75, 100, 150 mm

On request:

  • In-between widths, larger widths and other dimensions

Please consider our warranty.

standard storage goods
Length Teeth
[mm]
CAD 630 63 CAD
CAD 660 66 CAD
CAD 700 70 CAD
CAD 780 78 CAD
CAD 840 84 CAD
CAD 890 89 CAD
CAD 920 92 CAD
CAD 1010 101 CAD
CAD 1080 108 CAD
CAD 1150 115 CAD
CAD 1280 128 CAD
CAD 1400 140 CAD
CAD 1650 165 CAD
CAD 1800 180 CAD

Belt width b [cm]

\begin{align}
b& = {F_U \over {z_e \cdot F_{Uspez}}} && F_U [N] \\
b& = {100 \cdot M \over {z_1 \cdot z_e \cdot M_{spez}}} && M [Nm]\\
b& = {1000 \cdot P \over {z_1 \cdot z_e  \cdot P_{spez}}} && P [kW]
\end{align}

Load bearing characteristics of the drive

when belt width [cm] is

\begin{align}
F_{U}& = {F_{Uspez} \cdot z_e \cdot b} &&[N]\\
M& = {{M_{spez} \cdot z_1 \cdot z_e \cdot b} \over {100}} &&[Nm]\\
P& = {{P_{spez} \cdot z_1 \cdot z_e \cdot b} \over {1000}} &&[kW]
\end{align}

Number of teeth in mesh

\begin{align}
 z_{e max}& = {16}\\
 z_e& = {{{z_1} \over {180}} \cdot \arccos{{t \cdot (z_2 - z_1)} \over {2\pi \cdot a}}}\\
 \end{align}

 

1. Tooth shear strength

specific belt tooth strength

Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm] Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm]
0 105,050 16,713 0,000 1900 58,655 9,332 18,568
20 103,508 16,468 0,345 2000 57,636 9,170 19,205
40 102,064 16,238 0,680 2200 55,722 8,865 20,425
60 100,706 16,023 1,007 2400 53,957 8,584 21,575
80 99,424 15,818 1,326 2600 52,318 8,324 22,663
100 98,210 15,626 1,637 2800 50,790 8,081 23,694
150 95,432 15,183 2,385 3000 49,358 7,853 24,671
200 92,956 14,790 3,098 3200 48,010 7,638 25,597
300 88,706 14,110 4,433 3400 46,737 7,436 26,476
400 85,093 13,538 4,433 3600 45,532 7,245 27,310
500 81,989 13,045 6,830 3800 44,387 7,062 28,102
600 79,257 12,609 7,923 4000 43,297 6,888 28,855
700 76,817 12,222 8,958 4500 40,780 6,488 30,575
800 74,614 11,871 9,945 5000 38,513 6,127 32,084
900 72,604 11,551 10,887 5500 36,452 5,799 33,403
1000 70,758 11,257 11,789 6000 34,561 5,499 34,549
1100 69,049 10,986 12,654 6500 32,815 5,221 35,538
1200 67,461 10,733 13,487 7000 31,194 4,963 36,380
1300 65,975 10,496 14,290 7500 29,679 4,722 37,087
1400 64,580 10,275 15,063 8000 28,260 4,496 37,666
1500 63,265 10,065 15,811 8500 26,923 4,283 38,128
1600 62,022 9,868 16,534 9000 25,661 4,082 38,477
1500 60,844 9,680 17,234 9500 24,464 3,892 38,721
1600 59,723 9,502 17,911 10000 23,328 3,711 38,865

Rotational speeds over 10000 rpm and/or belt speeds over 60 m/s are in need of a special drive design. Please request for our advice.

2. Tension cord strength [N]

permitted tensile force of the belt Fzul

Belt width b [mm] 16 25 32 50 75 100 150
SYNCHROFLEX ATP10 Gen. III 3000 5000 6750 10750 16500 22000 33500

3. Belt weights [kg/m]

Belt width b [mm] 16 25 32 50 75 100 150
SYNCHROFLEX ATP10 Gen. III 0,109 0,170 0,218 0,340 0,510 0,680 1,020

4. Flexibility

Minimum numbers of teeth, minimum diameter

( X ) without contraflexure

( X X ) with contraflexure

Belt type Number of teeth zmin ( X ) Tension roller dmin [mm] ( X ) Number of teeth zmin ( X X ) Tension roller dmin [mm] ( X X )
SYNCHROFLEX ATP10 Gen. III 15 50 25 120

ATP10 GEN III CONTI® SYNCHROFLEX Polyurethan-Zahnriemen