T2 CONTI® SYNCHROFLEX polyurethane timing belt

Version:

  • Standard, single-sided
  • Standard T profile according to DIN 7721 with metric pitch and trapezoidal teeth
  • The technical data refer to the standard casting polyurethane and standard steel tension members
  • Preferred belt widths: 4, 6, 10 mm

On request:

  • Double-sided; with flights on the back of the belt; with reinforced back of the belt; polyurethane special materials; further tension member versions (steel, textile tension member); antistatic, coloured, mechanical reworked
  • In-between widths, larger widths and other dimensions

Please consider our warranty.

standard storage goods
Length Teeth
[mm]
CAD 90 45 CAD
CAD 108 54 CAD
CAD 118 59 CAD
CAD 120 60 CAD
CAD 138 69 CAD
CAD 140 70 CAD
CAD 144 72 CAD
CAD 150 75 CAD
CAD 160 80 CAD
CAD 180 90 CAD
CAD 200 100 CAD
CAD 220 110 CAD
CAD 240 120 CAD
CAD 256 128 CAD
CAD 262 131 CAD
CAD 280 140 CAD
CAD 292 146 CAD
CAD 320 160 CAD
CAD 360 180 CAD
CAD 600 300 CAD
CAD 710 355 CAD

Belt width b [cm]

\begin{align}
b& = {F_U \over {z_e \cdot F_{Uspez}}} && F_U [N] \\
b& = {100 \cdot M \over {z_1 \cdot z_e \cdot M_{spez}}} && M [Nm]\\
b& = {1000 \cdot P \over {z_1 \cdot z_e  \cdot P_{spez}}} && P [kW]
\end{align}

Load bearing characteristics of the drive

when belt width [cm] is

\begin{align}
F_{U}& = {F_{Uspez} \cdot z_e \cdot b} &&[N]\\
M& = {{M_{spez} \cdot z_1 \cdot z_e \cdot b} \over {100}} &&[Nm]\\
P& = {{P_{spez} \cdot z_1 \cdot z_e \cdot b} \over {1000}} &&[kW]
\end{align}

Number of teeth in mesh

\begin{align}
 z_{e max}& = {12}\\
 z_e& = {{{z_1} \over {180}} \cdot \arccos{{t \cdot (z_2 - z_1)} \over {2\pi \cdot a}}}\\
 \end{align}

 

1. Tooth shear strength

specific belt tooth strength

Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm] Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm]
0 6,580 0,209 0,000 2200 3,500 0,111 0,257
20 6,360 0,202 0,004 2400 3,420 0,109 0,274
40 6,180 0,197 0,008 2500 3,390 0,108 0,282
60 6,030 0,192 0,012 2600 3,350 0,107 0,290
80 5,900 0,188 0,016 2800 3,290 0,105 0,307
100 5,790 0,184 0,019 2880 3,260 0,104 0,313
150 5,560 0,177 0,028 3000 3,230 0,103 0,323
200 5,380 0,171 0,036 3200 3,170 0,101 0,338
300 5,100 0,162 0,051 3400 3,120 0,099 0,354
400 4,890 0,156 0,065 3600 3,070 0,098 0,368
500 4,720 0,150 0,079 3800 3,020 0,096 0,383
600 4,580 0,146 0,092 4000 2,980 0,095 0,397
700 4,450 0,142 0,104 4500 2,880 0,092 0,432
730 4,420 0,141 0,108 5000 2,780 0,088 0,463
800 4,350 0,138 0,116 5500 2,700 0,086 0,495
900 4,250 0,135 0,127 6000 2,630 0,084 0,526
1000 4,160 0,132 0,139 6500 2,560 0,081 0,555
1100 4,080 0,130 0,150 7000 2,490 0,079 0,581
1200 4,010 0,128 0,160 7500 2,430 0,077 0,607
1300 3,940 0,125 0,171 8000 2,370 0,075 0,632
1400 3,880 0,124 0,181 8500 2,320 0,074 0,657
1460 3,850 0,123 0,187 9000 2,270 0,072 0,681
1500 3,820 0,122 0,191 9500 2,220 0,071 0,703
1600 3,770 0,120 0,201 10000 2,180 0,069 0,727
1700 3,720 0,118 0,211 12000 2,020 0,064 0,808
1800 3,670 0,117 0,220 15000 1,820 0,058 0,910
1900 3,620 0,115 0,229 18000 1,660 0,053 0,996
2000 3,580 0,114 0,239 20000 1,570 0,050 1,047

2. Tension cord strength [N]

permitted tensile force of the belt Fzul

Belt width b [mm] 4 6 10 16 25 32
SYNCHROFLEX T2 39 65 117 195 312 403
SYNCHROFLEX T2-FA 39 65 117 195 312 403
SYNCHROFLEX M 39 65 117 195 312 403

3. Belt weights [kg/m]

Belt width b [mm] 4 6 10 16 25 32
SYNCHROFLEX T2 0,004 0,007 0,011 0,018 0,028 0,035
SYNCHROFLEX T2-FA 0,004 0,007 0,011 0,018 0,028 0,035
SYNCHROFLEX M 0,005 0,007 0,012 0,019 0,030 0,038

4. Flexibility

Minimum numbers of teeth, minimum diameter

( X ) without contraflexure

( X X ) with contraflexure

Belt type Number of teeth zmin ( X ) Tension roller dmin [mm] ( X ) Number of teeth zmin ( X X ) Tension roller dmin [mm] ( X X )
         
SYNCHROFLEX T2 10 15 18 15
SYNCHROFLEX T2-FA 10 15 18 15
SYNCHROFLEX M 10 15 18 15

T2 CONTI® SYNCHROFLEX Polyurethan-Zahnriemen