BAT10 BRECO® polyurethane timing belt (open length)

Version:

  • single-sided
  • Preferred delivery in rolls of 50 m or 100 m
  • Minimum length endless joined: 880 mm
  • Standard material: TPUST1 (other materials can be requested)
  • Steel tension member
  • Preferred timing belt widths: 25, 32, 50, 75, 100 mm

Note:

  • Please specify lengths above 100 m separately
  • VA tension member available (Ask for minimum order quantity)

Please consider our warranty.

standard storage goods
Cut to length
[mm]
CAD 50000 CAD
CAD 100000 CAD
CAD CAD

1. Tooth shear strength

specific tooth force

Rotational speed n [rpm] Ftspez [N/cm] Rotational speed n [rpm] Ftspez [N/cm]
0 92,75 2000 50,887
20 91,389 2200 49,198
40 90,114 2400 47,639
60 88,914 2600 46,193
80 87,783 2800 44,843
100 86,711 3000 43,579
200 82,071 3200 42,389
300 78,303 3400 41,265
400 75,129 3600 40,201
500 72,389 3800 39,19
600 69,977 4000 38,228
700 67,823 4500 36,005
800 65,877 5000 34,004
900 64,103 5500 32,184
1000 62,473 6000 30,514
1100 60,965 6500 28,973
1200 59,562 7000 27,541
1300 58,25 7500 26,204
1400 57,018 8000 24,951
1500 55,858 8500 23,771
1600 54,761 9000 22,656
1700 53,72 9500 21,6
1800 52,731 10000 20,596
1900 51,788    

The specific tooth force Ftspez is the maximum force N a belt tooth with a width of 1 cm can transmit. This value depends on the rotational speed of the drive pulley. The calculation takes into account each identical carrying values for each meshing tooth. With more than 12 meshing teeth ze is limited to 12.

\begin{align}
F_t&= {F_{tspez} \cdot z_e \cdot b}\\
F_t& = {\text{Tangential force}}\\
F_{tspez}&= {\text{Specific tooth force in N/cm}}\\
b& = \text{Belt width in cm} \\
z_e&= \text{Number of meshing teeth}\\
z_{emax}&= 12
\end{align}

2. Tension cord strength (M) Ftzul [N] (open length)

permitted tensile force of the belt cross-section

Belt width b [mm] 25 32 50 75 100
BRECO BAT10 3750 5000 7500 12000 17000

Specific elasticity Cspez [N]:

Bsp: 10[6] = 106

Belt width b [mm] 25 32 50 75 100
BRECO BAT10 1,06*10[6] 1,37*10[6] 2,12*10[6] 3,18*10[6] 4,25*10[6]

Belt weights [kg/m]:

Belt width b [mm] 25 32 50 75 100
BRECO BAT10 0,158 0,180 0,290 0,436 0,581

Pulley width [mm]:

Belt width b [mm] 25 32 50 75 100
BRECO BAT10 30 35 55 80 105

3. Flexibility

Minimum number of teeth, minimum diameter

 

( X ) without contraflexure

 

 

( X X ) with contraflexure

 

Belt type Number of teeth Tension roller Number of teeth Tension roller
  zmin (X) dmin [mm] (X) zmin (XX) dmin [mm] (XX)
BRECO BAT10 20 60 25 120

BAT10 BRECO® Polyurethan-Zahnriemen (Meterware)