Self-guiding profiles

BRECO® BAT timing belt

BRECO®, BRECOFLEX®  polyurethane timing belts with curved teeth are suitable for all areas of the drive, linear and conveying technology. Curved teeth are used especially for surrounding constructions, where no flanges are possible.

The special characteristics

  • self-guiding, no flanges required
  • reduced running noise due to overlapping tooth mesh
  • Power transmission throughout the entire width
  • reduced polygon effect
  • constant length due to high tensile steel cords

BRECO® SFAT timing belt

BRECO® SFAT timing belts show to toothed tracks in one belt construction. These toothed tracks are offset by half a tooth pitch in relation to each other. In combination with the accompanying synchronous pulleys, the self-guiding will cause the belt to run straight. For the drive assembly no flanges are required.

The special characteristics

  • self-guiding, no flanges required
  • reduced noise
  • Power transmission throughout the entire width
  • constant length due to high tensile steel cords