Welded flights

CONTI® SYNCHROFLEX polyurethane timing belts with welded-on flights/profiles:

The post-manufacture equipment with flights/profiles of timing belts is possible for all CONTI® SYNCHROFLEX polyurethane timing belts with a pitch of T 2.5 and over. The flights/profiles are welded on the back of the belt by thermal butt-welding in number and position according to customer drawing. The reachable weld-on tolerance of each individual flight is ± 0,5 mm. Various hundreds shapes of flights are available. Please ask for additional information. For special customer requirements new flights can be manufactured.

Examples of possible flight shapes with mechanical rework:

a
b
c
d
e
f
g
h
i
j
k
l

The various shapes of flights allow an adaptation of the transport timing belt to the envisaged practical function. The flight pitch is freely selectable. The flights can be manufactured with moulded inserts. Profile attachments can be retrofitted (positioned). The welding point itself and the maximum bending stress are subject to special parameters.
Please ask for technical advice.

Fields of application:
General transport technology

  • Conveying/transporting
  • Separation
  • Positioning
  • Indexing
  • Supplying

Ordering example