Technical data BAT15

Belt width b [cm]

\begin{align}
b& = {F_U \over {z_e \cdot F_{Uspez}}} && F_U [N] \\
b& = {100 \cdot M \over {z_1 \cdot z_e \cdot M_{spez}}} && M [Nm]\\
b& = {1000 \cdot P \over {z_1 \cdot z_e  \cdot P_{spez}}} && P [kW]
\end{align}

Load bearing characteristics of the drive

when belt width [cm] is

\begin{align}
F_{U}& = {F_{Uspez} \cdot z_e \cdot b} &&[N]\\
M& = {{M_{spez} \cdot z_1 \cdot z_e \cdot b} \over {100}} &&[Nm]\\
P& = {{P_{spez} \cdot z_1 \cdot z_e \cdot b} \over {1000}} &&[kW]
\end{align}

Number of teeth in mesh

\begin{align}
 z_{e max}& = {12}\\
 z_e& = {{{z_1} \over {180}} \cdot \arccos{{t \cdot (z_2 - z_1)} \over {2\pi \cdot a}}}\\
 \end{align}

 

1. Tooth shear strength

specific belt tooth strength

Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm] Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm]
0 140,00 33,439 0,000 1600 77,44 18,497 30,989
20 137,70 32,891 0,689 1700 75,75 18,093 32,207
40 135,56 32,379 1,356 1800 74,14 17,709 33,379
60 133,55 31,898 2,004 1900 72,61 17,344 34,506
80 131,65 31,445 2,634 2000 71,15 16,995 35,591
100 129,86 31,018 3,248 2200 68,41 16,340 37,643
200 122,15 29,175 6,110 2400 65,89 15,737 39,548
300 115,92 27,687 8,697 2600 63,54 15,177 41,320
400 110,69 26,439 11,074 2800 61,36 14,655 42,967
500 106,19 25,364 13,279 3000 59,31 14,166 44,500
600 102,24 24,420 15,342 3200 57,38 13,705 45,924
700 98,71 23,578 17,282 3400 55,56 13,271 47,248
800 95,54 22,819 19,116 3600 53,84 12,860 48,476
900 92,64 22,128 20,853 3800 52,20 12,469 49,615
1000 89,98 21,493 22,506 4000 50,65 12,097 50,668
1100 87,53 20,906 24,080 4500 47,05 11,238 52,956
1200 85,24 20,361 25,584 5000 43,82 10,465 54,793
1300 83,11 19,851 27,022 5500 40,87 9,762 56,224
1400 81,11 19,373 28,400 6000 38,17 9,118 57,286
1500 79,22 18,922 29,721 6500 35,68 8,523 58,009

Rotational speeds over 10000 rpm and/or belt speeds over 60 m/s are in need of a special drive design. Please request for our advice.

2. Tension cord strength [N]

permitted tensile force of the belt Fzul

Belt width b [mm] 50 75 100
BRECOFLEX BAT15 10400 16000 21600
BRECOFLEX BAT15 VA-tension member 8300 12800 17300

3. Belt weights [kg/m]

Belt width b [mm] 50 75 100
BRECOFLEX BAT15 0,420 0,629 0,836

4. Flexibility

Minimum numbers of teeth, minimum diameter

( X ) without contraflexure

( X X ) with contraflexure

Belt type Number of teeth zmin ( X ) Tension roller dmin [mm] ( X ) Number of teeth zmin ( X X ) Tension roller dmin [mm] ( X X )
BRECOFLEX BAT15 20 100 30 150
BRECOFLEX BAT15-E 15 70 25 120
BRECOFLEX BAT15 VA-tension member 25 120 35 180